DIY Rustic Kitchen Island

Kitchen island; made to order!

Kitchen island; made to order! (That is Sherlock. He’s my inspector Kitty!)

You are gonna guess it right…my wood scrape pile is fairly large. With that said, I’ve been needing an island in the kitchen. As you all know I am short and after a big day of chopping and mixing on my kitchen counters, it starts to wear on my shoulders. So, I decided to build this island to give my shoulders a bit of a reprieve.

This post is to basically tell you if something isn’t working, build it to suit!

I built the top of this island first. I know, not very conventional, but I'm not conventional either! :P

I built the top of this island first. I know, not very conventional, but I’m not a conventional person either! 😛

The top of the island is basically 1×4’s. And a ton of screws! I really need to get a jig so I can make pocket holes. (Please Santa send me a kreg pocket jig ! I’ve been a really good girl!)

asdfasdf

I cut 2×4’s to the height that would work for me! And used 1×4 cross pieces for support which will also support a shelf.

I am not certain I like this color, but for now it will do. Mind you, I do love orange, just not sure about this particular shade. So one day on a future post you may see it a different color!

I am not certain I like this color, but for now it will do. Mind you, I do love orange, just not sure about this particular shade. So one day on a future post you may see it a different color!

Yep same as the first pic. As you can see there are two shelves. I used 1x4 cleat for the bottom shelf too.

Yep same as the first pic. As you can see there are two shelves. I used 1×4 cleat for the bottom shelf as well.  Notice the kitchen cabinets and floor. I am hoping this year to get to refinishing both! Stay tuned! 😀

This island dubs as a laundry folding center and has been a great computer table. When I use it as a computer table I take off all the bottom slats and one slat on the top shelf for leg room, still giving me a shelf for books and things. This could also work as a potting table outside. Just remember to coat it with a few coats of polyurethane to protect it from the elements.

So you see, scrap wood isn’t just for kindling…This was a simple project using 1×4’s and 2×4’s for legs. It can be done with 1×2’s, 1×6’s…4×4 legs would be awesome, really limitless in what you can build with just a basic table idea.

You too can do this! I believe in YOU!

Side note: The weather has been beautiful. I hope you all find the time to go outside and enjoy the sun. Read up on how important vitamin D is for you! Sunshine is so uplifting. Sadness just has a way of seeping away as the sun warms your skin. So get out there take deep breaths and let the rays fill you with happy!

I appreciate every one of you liking, sharing, and following me. You are like the sun! Peace, Koko ❤