DIY Simple Wall Fix In Seconds

Remember the desk I repurposed? (see it here) The wall I’m referring to is the wall I see when I am creating at my desk. I had troubles doing anything with ugly holes staring back at me the whole time! I’m talking at least 20 unsightly holes! I took a shelving system down because something I am building will be in it’s place: Hopefully sooner than later, (waiting for my order to come in). Back to the ugly holes in the wall…I needed a quick fix.

My solution…

IMG_7318

See how to “DIY” lampshade here. Great place to set my computer glasses!

Yes, a door! Voila! The ugly sight was fixed in seconds. (I will do a proper job with spackle later…) Since this is what I see…I wanted to pretty-it-up, by adding the antlers and it was simple enough to do…

IMG_7276 (1)

The string was something I had on hand. It was too thin so I braided three strands for a thicker “rope”.

IMG_7278

Seeing a wall full of this was not very inspirational.

IMG_7274

I screwed in two of theses hooks. (See tip below for easy pilot hole start.)

IMG_7271

Tip: You need a nail and a hammer…But keep in mind you want the nail you use to be thinner than the screw, otherwise the screw will not have something to bite into.

IMG_7272

Tap the nail in (Not too far. Just a few taps will do.) See the hole near the right side of the nail?

IMG_7274

Tapping in a pilot hole helps to guide the screw in. Just screw in the screw!

If you have an unsightly wall, you can fix it fast, by using an old door, new door, shoji screen, even a lovely quilt. This quick fix allows me to breathe easier seeing something pretty until I can get to repairing it.

Here’s to making the life around you beautiful. Peace, Koko

Mouse over the pics below to see the caption…Something I didn’t know! Found out accidentally! Teehee!

 

DIY Lamp Shade

picstitch (1)

I have this lamp shade that has cracks and dents in it. (Actually I have a few shades with cracks and dents in it.) A casualty of the kitties turning every surface and object into their obstacle course. This lamp has been knocked over more times than I can count. I’m surprised the lamp even works! The shade, well it has seen better days.

This is actually its good side.

This is actually its good side.

Today this post is about taking a broken, cracked, dented lamp shade and making it brand new again. Here’s what I did… (Items used: 1 dinged up lamp shade, fabric, scissors, glue gun, glue sticks, measuring tape, lint roller, and a magic wand or a pencil, whichever you have on hand!)

Lint roller is for all the kitty hair attached to said shade. Evidence it was them!!!!

Lint roller is for all the kitty hair attached to said shade. Evidence it was them!!!!

I cut out circles out of fabric I had on hand. (It was a curtain “made from a twin sheet” I fabric painted grey circles on for my daughters bedroom). We’ve moved from that house but I kept the curtains. I cut circles…many, many circles. I sorted out the circles that had any grey in them and set them aside for another project. Really, once you have your circles cut out, you are good to go.

Lots and lots of circles...

Lots and lots of circles…

Find the center using a pencil or magic wand...

Find the center using a pencil or magic wand…

Work the fabric around the pencil...

Work the fabric around the pencil…

I chose to start at the top of the lamp shade. I measured out about an inch between each little “flower” (that’s what I will call them from here on out✿.

And the fun begins! Start hot glueing.

And the fun begins! Start hot glueing. (Please pardon the dire need for a manicure. I work way too much with my hands!)

Yay, first flower! One down.

Yay, first flower! One down.

Then I glued a line of flowers in a straight line to the bottom of the shade. Measuring about an inch apart.

Then I glued a line of flowers in a straight line to the bottom of the shade. Again measuring about an inch apart. This way it gave me a guide to eyeball the rest of the flowers without having to measure. I still kept in mind roughly an inch all around each flower.

And glueing...

Keep on gluing…

And glueing...

Keep on gluing…

Keep on...well you get the picture.

Keep on…well you get the picture.

Almost done.

Almost done.

After you are done, adjust the "petals" (fluff them up)

After you are done, adjust the “petals” (fluff them up) and look for any bare spots.

Bare spot! Oh no.

I found one here… Bare spot! Oh no! Teehee, never fear. Easy fix…

All done!

Glue more as needed… All done!

And there you have it.

Yippee! ❀

And there you have it. A lampshade that was destined for the trash. Now recycled, remade, renewed. All it really cost me was my time.

It really lights up my life and the corner of the room too! ;)

It really lights up my life and the corner of the room too! 😉

You can do this technique with many types of fabric as well as tissue paper! You can cut the shapes into circles or even squares. Technique stays the same. I hope you’ve enjoyed the post. Please “Like, follow and share”. I really do appreciate you popping in!

I hope you find things that will light up your life today! ❀Koko❀